Specification
- Model Number：Mini UPS SK616
- Net Weight：480g
- Dimension：159*112*32mm
- Solar panel：≤18V/10-30W
- Output voltage：DC output 5 different voltages
- Built-in battery：2200mAh*6
- Discharge time：The specific discharge time needs to be determined according to the load power
- Rated charge current：2A
- Rated discharge current：2A
- System voltage：11.1V
- shutdown loss：＜200uA
- Overvoltage Protection：12.6V
- Charging Voltage：13V
- Undervoltage：10V
- Overdischarge：9V
- Charging control mode：External constant current constant voltage charger or solar panel
- Working temperature：0℃~45℃
- Protection circuit：overcharge, overdischarge, overload and short circuit protection (Double protection of main control board and battery board)
Charging Operating Instructions:
Insert the solar panel (power: 10W~30W; nominal voltage: 15V; open circuit voltage: 18V) or a constant current and constant voltage charger (output: 13V/1A~2A) into the charging input port, and the charging indicator flashes red , the green light is always on after fully charged, indicating that the charging status is normal.
Features
1. Using a single-chip microcomputer as the main control, it realizes intelligent control of battery charging and discharging, overcharge and overdischarge protection functions, and short circuit protection functions. When the load is overloaded, the system will automatically shut down and automatically return to normal after a few seconds. Effective Extended battery life, battery over-discharge voltage recovery control function.
2. Ultra-low power standby function: When the ON/OFF switch is in the OFF state, the product enters a low power consumption state.
3. USB output: when charging mobile phones, MP3/MP4, digital cameras and other digital products, the output current is 5V/2A.
4. Independent functions of charging and discharging: charging and discharging do not interfere with each other, realizing that discharging can be carried out at the same time when charging. Note: When multiple voltages are discharged at the same time, the total discharge power should not exceed 30W.
5. Charging and discharging indication function: monitor the charging and discharging status of the system at any time. When charging, the Charge indicator light flashes red, and the Work indicator light is always green; when fully charged, the two lights are always green; when discharging, the Work indicator light is green. When low voltage is present, the Charge indicator will light up in red.
6. The product has overcharge, overdischarge, overload, and short circuit protection functions (short circuit protection needs to be activated by charging), and the red indicator light is always on when undervoltage.
Note:
Safety Warning:
1.Before using the product, please read the product manual carefully.